80 Nm3/Hr Ammonia Cracker Equipment

Hydrogen Generating Plant, Ammonia Crack Equipment, Easy to be Installed

Product Description:

The most efficient and economic way of getting hydrogen is to crack the ammonia. To heat the liquid ammonia up to 800℃, the ammonia is easy to reacte with the nickel catalyst and then it cracked quickly. The product of this process is the mixture gas of 75% H2 and 25% N2. One kg of liquid ammonia can produce 2.64Nm3 mixed gas.

We well desing the equipment and it's also easy to be installed. The core part of cracking system is made of INCO ALLOYS,which is the material of corrosion-resistant, Alka-resistant and Acid-resistant, service life is more than 10 years.The structure of furnace is relative sealing structure, with the advantage of rapid temperature rise.Heating element is made of full alloy, with plug in assembly. It's no need to stop the gas when replace the heat elements. Alarm automatically when pressure has too higher or too lower.

Above is the standard configuration.The ammonia cracker is a kind of non-standard equipment, but we can design the equipment based on customers' requirement. Some additional functions also can be added:
1. PLC programmed controller can be added, which can automatically control the various working states of the equipment.
2. Dew point detector can be added.
3. Gas content testing system can be added.

Technical Indicators:

System Characteristics:

The gas made in this method is a good protective gas which can be used widely in steel wire industry, metallurgical industry and other industries and science research where need protective gas.
1. Ammonia is easy to be cracked: With not very high pressure, under the reaciton of nickle catalysts, and a temperature controlled at around 800ºC, the ammonia will nearly completely crack, with the cracking rate reaching 99.9%.
2. Easy to refine the gas: As the raw material, the liquid ammonia is of very high purity. The volatile impurities are only little inert gas and water dissolved in the liquid ammonia and there is nearly no oxygen. So the water can be removed by adsorbing with a dew point of -60 ºC while the gas going through the 5A molecular sieve. By this way, the water and residual ammonia which are harmful in the processing point can be removed.
3. The liquid ammonia as raw material is easily accessible at a low price and the raw material consumption is also relatively smaller( In theory, each Kg of ammonia can create 2.64 Nm3 mixed gas).

80 Nm3/Hr Hydrogen Generating Plant

0.1Mpa Ammonia Cracking Unit 

80 Nm3/Hr Ammonia Cracker Equipment

80 Nm3/Hr Ammonia Cracker Equipment Images